Monday, May 9, 2022
Both methods are used in “mass finishing”. “Mass finishing” is a fancy term used in the metal finishing industry, referring to the production of large quantities of parts at one time, thus reducing the cost per piece. Many end results are completed by mass finishing, including rust removal, scale removal, burnishing and deburring. It is also used for polishing/brightening surfaces.
Tumbling, or barrel finishing simulates the motion of rocks tumbling down a hill. To get this effect, parts are placed inside a barrel along with water and compounding agents. The barrel is rotated causing the parts to tumble upon themselves creating friction. This friction results in the deburring of the part. Media is often added to increase this friction, shortening cycle times/improving efficiency.
Vibratory finishing simulates a corkscrew effect. To get this effect, parts are placed, along with media and compounds into a vibratory bowl. The parts corkscrew through the media while grinding against one another, resulting in deburring and/or polishing of the mass of parts.
Various vibratory equipment is available. There are round bowls, tubs, and flow through machines.
COMPARING AND CONTRASTING THE TWO MASS FINISHING TYPES
Both processes have their pros and cons. Vibratory finishing is usually more automated, reducing some labor needs and costing. Delicate parts that may be damaged in the tumbling process are normally vibratory finished. Large parts as well, usually perform better in a vibratory setting. It can also hold tighter tolerances. However, vibratory finishing is usually the more expensive process due to equipment and process costs, as they wear media much quicker.
WE HAVE BOTH
At Latem Industries Limited, we have been running both processes for over 40 years. Lean on our experience to assist you with coming up with the best, cost-effective process for your mass finishing needs.
| Mike Zinger |
May 9, 2022
| Generic Administrator |
March 23, 2020
| Traffic Soda |
August 30, 2019